■Move the
■Assign IP Type as ‘Dynamic IP’ in the Connection Configuration item, if the user uses
●Be aware if the Connection Configuration item is not set properly to the user’s network environment, the access cannot be done or the image cannot be appeared smoothly.
■If the user uses
■If the user click the Apply button, the message to terminate the internet browser and reboot the camera will be appeared.
■After powering off the
■And then powering on, the camera will operate as ADSL/Cable Modem mode and receive to operate a new IP from the ADSL/Cable ISP.
●ADSL / Cable modem can be delayed or failed as the ISP condition. In case of this, ON/OFF the modem and wait for about 1 minute after powering off
■ This new ADSL/Cable IP is registered in the DDNS server. | E |
■User can monitor the image to access the camera after entering the DDNS address (Example: cfffe42.websamsung.net) in the Remote PC internet browser.
●Depends on the ISP condition, the ADSL/Cable IP registered in DDNS can be delayed to access, wait for about 1~2 minutes and retry to access if the access fails in the beginning.
■DDNS Address is composed of 6 figures at the end of
Example) If the MAC Address of