1-6 CHAPTER 1: GETTING STARTED

Pack Contents Checklist

Before you install your AccessBuilder 500, check the contents of the box against the pack contents checklist below. If any of the items have been damaged in transit or are missing, then contact the 3Com dealer from whom the equipment was purchased.

1 x AccessBuilder 500 unit.

1 x 2 meter mains lead with fitted with molded plug.

1 x 3 meter RJ-45 to RJ-45 male plug ISDN 2 connecting cable.

1 x 100 mm crossover cable.

1 x 9-pin D-type to 25-pin D-type socket, gender changer (COM port adapter).

1 x Control port cable (remote management).

1 x BT to RJ11 voice port converter.

1 x Software Utilities Diskette.

1 x AccessBuilder 500 User Guide.

1 x AccessBuilder ISDN Access Router Software Reference guide.

1 x Warranty Registration Card.

(US model only) 1 x NT1 Network Termination Unit.

It is important that you save the unit’s box and protective packing material in case you need to store, or transport it in the future.

The US version of the AccessBuilder Remote Office 500 is supplied with an NT1 ISDN Network Termination Unit (NTU). Follow the instructions provided with the NTU to connect the AccessBuilder Remote Office 500 to the ISDN.

Page 26
Image 26
3Com 500 manual Pack Contents Checklist