
1-18 CHAPTER 1: GETTING STARTED
Connecting to Your 10BaseT LAN
Figure 1-6 Connecting to the 10BaseT Port
You can use the 10BaseT connection on the AccessBuilder 500 in the following ways
■To connect directly to an Ethernet hub port.
■To connect to a 10BaseT
■To connect to a single workstation using a 10BaseT crossover cable.
Connecting to an Ethernet Hub
To connect directly to a hub:
1Connect the UTP cable (not supplied) to the 10BaseT port of the AccessBuilder 500.
2Connect the other end to a 10BaseT port on your hub.