Quick Configuration

1-33

Connecting to an IP Host on a Different IP Network

To connect to an IP host on a different network using FastConnect, enter IPR at the command prompt on the Quick Configuration screen to display the screen illustrated in Figure 1-18.

Figure 1-18 Connecting To An IP Host On A Different Network

Complete the fields on this screen as follows:

Remote ISDN Number Type the ISDN number of the remote unit that connects to the remote IP network.

Call Type Set the Call Type required for your ISDN line. Toggle this field to the Call Type required by your ISDN service provider.

IP Address of this unit’s LAN Type the IP address of this unit. This is the address you entered on the Name screen.

IP Mask of this unit’s LAN Type the IP subnet mask you entered for this unit on the Name screen. See Appendix A for more information about subnet masks.

IP Address of this end of the ISDN link By default this field is set to UNNUMBERED which allows unnumbered links to be used. This option is suitable for most network configurations.

Page 53
Image 53
3Com 500 manual Connecting to an IP Host on a Different IP Network, Connecting To An IP Host On a Different Network