3Com 500 manual Connecting to the Internet or a PPP Router

Quick Configuration 1-35

Connecting to the Internet or a PPP Router

To connect to an Internet router or to a router using Point-to-Point Protocol (PPP), enter IN at the command prompt on the Quick Configuration screen to display the screen illustrated in Figure 1-19.

Figure 1-19 Connecting To The Internet Or PPP Router

Complete the fields on this screen as follows:

If you are connecting to the Internet, your service provider will be able to give you the correct values for each of these fields.

If you are connecting to a remote PPP router, check with the system administrator of the remote network for the correct values for these fields.

Name of your Internet Provider or remote site Type the name of your Internet service provider or of the remote unit that connects to the remote IP network.

ISDN Number of the remote unit Type the ISDN number of the remote unit that connects to the remote IP network.

Call Type Set the Call Type required for your ISDN line. Toggle this field to the Call Type required by your ISDN service provider.