3Com 500 manual Connecting to an IP Host on the Same IP Network

Quick Configuration 1-31

Connecting to an IP Host on the Same IP Network

To connect to an IP host on the same network using FastConnect, enter IPB at the command prompt on the Quick Configuration screen to display the screen illustrated in Figure 1-17.

Figure 1-17 Connecting To An IP Host On The Same Network

Complete the fields on this screen as follows:

Remote ISDN Number Type the ISDN number of the remote unit that connects to the IP network.

Call Type Set the Call Type required for your ISDN line. Toggle this field to the Call Type required by your ISDN service provider.

Remote IP Address Type the IP address of the remote IP host to which you want to connect.

Press [CTRL]+[E] to submit this information.

An entry is made in the autocall table so that if any data is destined to the remote host, a call is made automatically and a connection made to the remote IP network.