3Com MSR 30 Interface attributes of FIC-1VE1, FIC-1VE1 panel is shown in the following figure

204CHAPTER 4: FLEXIBLE INTERFACE CARDS

FIC-1VE1

Introduction	1-port E1 voice interface module (FIC-1VE1) can handle dense voice signals in VoIP
	system. It provides a CE1/PRI/R2 port, allowing the access of 30 channels of voice
	signals.
n	■ VCPM is provided to users together with FIC-1VE1. Users can select VPM
	module as needed.
	■ VPM module is installed on the main board of FIC-1VE1.
Interface Attributes	The interface attributes of FIC-1VE1 are given in the following table.
	Table 149 Interface attributes of FIC-1VE1
	Attribute	Description
	Connector	DB-15
	Number of connectors	1
	Operating mode	CE1
		ISDN PRI
		R2
	Interface rate	2.048 Mbps
	Cable	E1 120-ohm balanced twisted pair
		cable
		75ohm-to-120ohm adapter
		Network interface connector
	Supported service	1) R2 signaling
		2) DSS1 signaling
		3) IP Fax
		4) General VoIP features in Comware
Interface LEDs
	FIC-1VE1 panel is shown in the following figure:
	Figure 250 FIC-1VE1 panel

Description of the LEDs on FIC-1VE1 panel is given in the following table:

Table 150 Description of the LEDs on FIC-1VE1 panel

LED	Description
LINK	OFF means no link is present;
	ON means a link is present.