3Com MSR 20 Interface attributes of MIM-1GBE/MIM-2GBE, Description Attribute, MIM-1GBE MIM-2GBE

70CHAPTER 3: MULTIFUNCTIONAL INTERFACE MODULES

■Operating speeds of 1000 Mbps, 100 Mbps, and 10 Mbps, as well as auto-sensing;

■Half-duplex/full duplex, autosensing

Interface Attributes The interface attributes of MIM-1GBE/MIM-2GBE are given in the following table:

Table 39 Interface attributes of MIM-1GBE/MIM-2GBE

	Description
Attribute	MIM-1GBE	MIM-2GBE
Connector	RJ-45
Number of connectors	1	2
Interface type	MDI/MDIX
Interface standard	802.3, 802.3u, 802.3ab
Cable type	Ethernet cable
Operating mode	10/100/1000 Mbps auto-sensing
	Half-duplex/full duplex, autosensing

Interface LEDs MIM-1GBE/MIM-2GBE panel is shown in the following figure:

Figure 67 MIM-1GBE panel

Figure 68 MIM-2GBE

The following table describes the LEDs on the MIM-1GBE/MIM-2GBE panel.

Table 40 Description of the LEDs on the MIM-1GBE/MIM-2GBE panel

LED	Description
LINK	OFF means no link is present; ON
	means a link is present.
ACT	OFF means no data is being
	transmitted or received; blinking
	means data is being received or/and
	transmitted.

Interface Cable MIM-1GBE/MIM-2GBE uses both crossover and straight-through cables for connection.