AppendixB Site-to-Site VPN User Interface Reference
Create VPN Wizard
B-16
User Guide for CiscoSecurity Manager3.0.1
OL-8214-02
Edit Endpoints Dialog Box
Use the Edit Endpoints dialog box to:
•Edit the VPN interfaces and protected networks defined for devices.
•Configurea dial backup interface to use as a fallback link for a primary VPN
interface.
•Define VPN Services Module (VPNSM) settings for a Catalyst 6500/7600
device.
•Define VPN SPA settings for a Catalyst 6500/7600 device.
•Configure FWSM on a Catalyst 6500/7600 device.
•Configure a VRF-Aware-IPSec policy on a hub device.
The following tabs may be available on the Edit Endpoints dialog box:
•VPN Interface Tab, pageB-17
•Protected Networks Tab, pageB-24
•FWSM Tab, pageB-26
•VRF Aware IPSec Tab, pageB-28
Note • You can select more than one device at a time for editing. The changes you
make on any tabs in the dialog box will be applied to all selected devices.
•When selecting multiple devices for editing the VPN interfaces, you cannot
include Catalyst 6500/7600 devices in your selection. If you want to edit
these devices, you must select them separately.
Finish button Saves your wizard definitions and closes the wizard.
Thenew or edited VPN topology appears in the VPNs selector in the
Site-to-Site VPN window,with the VPN Summary page displayed.
See VPN Summary Page, page B-3.
Cancel button Closes the wizard without saving your changes.
Help Opens help for this page.
TableB-6 Create VPN wizard> Endpoints Page (continued)
Element Description