B-35
User Guide for CiscoSecurity Manager3.0.1
OL-8214-02
AppendixB Site-to-Site VPN User Interface Reference Create VPN Wizard
Related Topics
•Endpoints Page, page B-13
•Configuring High Availability in Your VPN Topology, page9-51
•Create VPN Wizard, page B-8
Field Reference
TableB-13 Create VPN wizard> High Availability Page
Element Description
Enable When selected, enables you to configure high availability on a
group of hubs.
Note When deselected, enables you to remove an HA group that
was defined for the VPN topology.
Inside Virtual IP The IPaddress that will be shared bythe hubs in the HA groupand
will represent the inside interface of the HA group. The virtual IP
address must be on the same subnet as the inside interfaces of the
hubs in the HA group, but must not be identical to the IP address of
any of these interfaces.
Note If there is an existing standby group on the device, make
sure that the IP address you provide is different from the
virtual IP address already configured on the device.
Inside Mask The subnet mask for the inside virtual IP address.
VPN Virtual IP The IP addressthat will beshared by thehubs in theHA group and
will represent the VPN interface of the HA group. This IP address
will serve as the hub endpoint of the VPN tunnel.
Note If there is an existing standby group on the device, make
sure that the IP address you provide is different from the
virtual IP address already configured on the device.
VPN Mask The subnet mask for the VPN virtual IP address.
Hello Interval The duration in seconds (within the range of 1-254) between each
hello message sent by a hub to the other hubs in the group to
indicate status and priority.