AppendixB Site-to-Site VPN User Interface Reference
Create VPN Wizard
B-8
User Guide for CiscoSecurity Manager3.0.1
OL-8214-02
Create VPN Wizard
Security Manager supports three basic types of topologies with which you can
create a site-to-site VPN. Use the Create VPN wizard to create a hub-and-spoke,
point-to-point, or full mesh VPN topology across multiple devicetypes. For more
information, see Understanding VPN Topologies, page9-2.
Note Youcan deploy to your devices immediately after creating a VPN topology, using
the default policy configurationsprovided by Security Manager. All you need to
do is complete the steps of the Create VPN wizard.
Editing a VPN topology is done using the Edit VPN dialog box, which comprises
tabs whose elements are identical (except for the buttons) to the pages of the
Create VPN wizard. You can click a tab to go directly to the page that contains
the fieldsyou want to edit, without having to go through each step of the wizard.
Clicking OK on any tab in the dialog box saves your definitions on all the tabs.
For more information, see Editing a VPN Topology, page 9-24.
Show Select to display either the interface roles or matching interfaces,
for the VPN interfaces and protected networks in the table, as
follows:
•Interface Roles Only (default)—Todisplay only the interface
roles assigned to the VPN interfaces and protected networks.
•Matching Interfaces—Todisplay the interfaces that match the
pattern of each interface role. If there are no matching
interfaces “No Match” will be displayed.
Create button Opens the Device Selection tab of the Edit VPN dialog box on
which you can change the selection of devices in your VPN
topology. See Device Selection Page, page B-10.
Edit button Opens theEndpoints tab of the Edit VPN dialogbox on whichyou
can edit the VPN interfaces and protected networks for a selected
device in the table. See Endpoints Page, pageB-13.
TableB-3 Peers Page (continued)
Element Description