3D Innovations 3.0.1 appendix For more information, see Adding VPN SPA Slot Locations

Appendix B Site-to-Site VPN User Interface Reference

		Create VPN Wizard
Table B-8	Edit Endpoints Dialog Box > VPN Interface Tab > VPNSM/VPN SPA Settings
Element		Description
Slot		From the list of available slots, select the VPNSM blade slot number
		to which the inside VLAN interface is connected, or the number of
		the slot in which the VPN SPA blade is inserted.
		For more information, see Adding VPN SPA Slot Locations,
		page 5-44.
Subslot		The number of the subslot (0 or 1) on which the VPN SPA blade is
		actually installed.
		Note If you are configuring a VPNSM, select the blank option.
External Port		The external port or VLAN that connects to the inside VLAN.
		Note If VRF-Aware IPSec is configured on the device, the
		external port or VLAN must have an IP address. If
		VRF-Aware IPSec is not configured, the external port or
		VLAN must not have an IP address.
		Click Select to open a dialog box that lists all available interfaces,
		and sets of interfaces defined by interface roles, in which you can
		make your selection, or create interface role objects. For more
		information, see Interface Roles Page, page C-126.
		Note You must select an interface or interface role that differs
		from the one selected for the inside VLAN.
Enable Failover Blade		When selected, enables you to configure a failover VPNSM or VPN
		SPA blade for intra chassis high availability.
		Note A VPNSM blade and VPN SPA blade cannot be used on the
		same device as primary and failover blades.
Failover Slot		From the list of available slots, select the VPNSM blade slot number
		that will serve as the failover blade, or the number of the slot in
		which the failover VPN SPA blade is inserted.
Failover Subslot		Select the number of the subslot (0 or 1) on which the failover VPN
		SPA blade is actually installed.
		Note If you are configuring a VPNSM, select the blank option.

	User Guide for Cisco Security Manager 3.0.1
OL-8214-02		B-23