3D Innovations 3.0.1 appendix Dial Backup Settings Dialog Box

Appendix B Site-to-Site VPN User Interface Reference

Create VPN Wizard

Table B-11	Edit Endpoints Dialog Box > VRF Aware IPSec Tab (continued)
Element		Description
Process Number		Available only if the 2-Box radio button is selected, and if the
		selected routing protocol is OSPF.
		The routing process ID number that will be used to identify the
		secured IGP.
		The range is 1-65535.
OSPF Area ID		Available only if the 2-Box radio button is selected, and if the
		selected routing protocol is OSPF.
		The ID number of the area in which the packet belongs. You can
		enter any number from 0-4294967295.
		Note All OSPF packets are associated with a single area, so all
		devices must have the same area ID number.
Next Hop IP Address		Available only when a 2-Box solution is selected with static routing.
		Specify the IP address of the interface that is connected to the IPSec
		Aggregator.
Redistribute Static Route		Available only when a 2-Box solution is selected with any routing
		protocol other than Static route.
		When selected, enables static routes to be advertised in the routing
		protocol configured on the IPSec Aggregator towards the PE device.
OK button		Saves your changes locally on the client and closes the dialog box.
		Note When you select the new or edited hub-and-spoke topology
		in the Site-to-Site VPN Manager window, an indication of
		VRF-Aware IPSec configuration appears in the VPN
		Summary page. See VPN Summary Page, page B-3.
Cancel button		Closes the dialog box without saving your changes.
Help button		Opens help for this tab.

Dial Backup Settings Dialog Box

Use the Dial Backup Settings dialog box to define optional settings for configuring a dial backup policy for your site-to-site VPN. These settings are available for IPSec, GRE, GRE Dynamic IP, or DMVPN technologies.

	User Guide for Cisco Security Manager 3.0.1
B-32	OL-8214-02