3D Innovations 3.0.1 appendix Element Description

Appendix B Site-to-Site VPN User Interface Reference

Site to Site VPN Policies

Table B-22	GRE Modes Page > DMVPN Policy (continued)
Element		Description
Hello Interval		Available only if you selected the EIGRP routing protocol.
		The interval between hello packets sent on the interface, from 1 to
		65535 seconds. The default is 5 seconds.
Hold Time		Available only if you selected the EIGRP routing protocol.
		The number of seconds the router will wait to receive a hello
		message before invalidating the connection. The range is 1-65535.
		The default hold time is 15 seconds (three times the hello interval)
Delay		Available only if you selected the EIGRP routing protocol.
		The throughput delay for the primary route interface, in
		microseconds. The range of the tunnel delay time is 1-16777215.
		The default is 1000.
Failover Delay		Available only if you selected the EIGRP routing protocol.
		The throughput delay for the failover route interface, in
		microseconds. The range of the tunnel delay time is 1-16777215.
		The default is 1500.
Hub Network Area ID		Available only if you selected the OSPF routing protocol.
		The ID number of the area in which the hub’s protected networks
		will be advertised, including the tunnel subnet. You can enter any
		number. The default is 1.
Spoke Protected Network Area		Available only if you selected the OSPF routing protocol.
ID		The ID number of the area in which the remote protected networks
		will be advertised, including the tunnel subnet. You can enter any
		number. The default is 2.
Authentication		A string that indicates the OSPF authentication key. The string can
		be up to eight characters long.
Cost		Available if you selected the OSPF or RIPv2 routing protocol.
		The cost of sending a packet on the primary route interface. You can
		enter a value in the range 1-65535. The default is 100.

	User Guide for Cisco Security Manager 3.0.1
B-66	OL-8214-02