108 |
| 4 BIOS setup |
|
|
|
Parameter | Description | Option |
|
|
|
Legacy USB | Enables or disables the support for | Enabled |
Support | legacy USB devices. | Disabled |
|
| Auto |
Port 60/64 | Enables or disables the I/O port 60/64h |
Emulation | emulation support. |
| This parameter is enabled for complete |
| USB keyboard legacy support for non- |
| USB aware OS. |
Enabled
Disabled
Device Reset | Select the number of seconds POST waits |
Timeout | for the USB mass storage device after |
| the start unit command. |
20Sec
10Sec
30Sec
40Sec
Storage | When set to Auto, USB mass storage |
Emulation | devices with less than 530 MB will be |
| emulated as a floppy and the remaining |
| as hard drives. |
| The Forced FDD option can be used to |
| force a formatted HDD to boot as a FDD. |
Auto
Floppy
Forced FDD
Hard Disk
USB 2.0 | Sets the transfer rate at Hi Speed | Enabled |
Controller | (480 Mbps) or Full Speed (12 Mbps). | Disabled |
|
|
|
