115
Parameter | Description | Option |
|
|
|
Resume on AC Power Loss
Defines the mode of operation if a power loss occurs.
When set to Stay Off, the system remains off after power shutdown.
When set to Last State, the system returns to the state it was prior to the AC power loss.
When set to Reset, the system will turn on after power is restored.
Stay Off
Last State
Reset
Clear System | Deletes all events in the System Event | Disabled |
Event Log | Log. | Enabled |
When Enabled, the BMC (Baseboard | |
| Management Controller) will reset the |
| system if BIOS does not complete the |
| POST before the |
| Booting) timer expires. |
Enabled
Disabled
O/S Boot | Enables or disables the BIOS timer. It |
Watchdog | helps to determine if the OS has |
Timer | loaded successfully or followed the OS |
| boot watchdog timer policy. |
| The BIOS timer can only be shut off |
| using the management software after |
| the OS loads. |
Disabled
Enabled
Console | Press Enter to access the Console |
Redirection | Redirection submenu. |
|
|
System | Press Enter to access the System |
Information | Information submenu. |
|
|
