Managing the AMASS File System
Manually Load New Volumes
Introduce new volumes to both the File System Database and to the library interface by performing the following procedure:
Step 1. Make sure the power is off.
WARNING
Power off the library before opening the library door.
Step 2. Log in as either amass or root.
#su root
Step 3. Manually load media directly into a home storage slot or remove media from a slot.
Step 4. Run the appropriate command from the following list to update the library interface:
•AML - run the inventory command from DAS if you are using an AML.
•IBM - run a similar command from LMCPD if you are using an IBM.
•StorageTek ACS - run a similar command from the ACSLS Server if you are using a StorageTek ACS.
Step 5. Run the bulkload
File System Database to the library interface.
# bulkload
Command Reference |