Managing the AMASS File System
Disable Feature for A
In the following example, we set the drive to zero timeout; the idle eject feature will be disabled for the specified drive.
Note
This example assumes the global IDLETIME parameter has been set to zero also.
#drivestat
Setting Idle Eject value for drive 1, juke 1, from 480 to 0 seconds. OK [y/n]? y
Drive 1, in juke 1, will not eject idle volumes (feature disabled).
Disable Feature for A
In the following example, we set the drive to zero timeout; but the idle eject feature will not be disabled.
Note
This example assumes the global IDLETIME parameter has been set to 31 seconds.
#drivestat
Setting Idle Eject value for drive 1, juke 1, from 480 to 0 seconds. OK [y/n]? y
Drive 1, in juke 1, will eject idle volumes after 31 seconds (global idletime).
Command Reference |