Managing the AMASS File System
attributes of the second volume group. If the values do not match, AMASS issues an error and does not complete the reassignment. For information on numerical volume groups, see “Volume Groups Defined” on page
Configure Block Size
Thoroughly understand what this option does before using it.
Caution
Use the tape block size option
Tip
For detailed information on optimizing block size, see
Refer to the AMASS Release Notes for a list of drives that support configurable block size.
Configure Compression
Refer to the AMASS Release Notes for a list of drives that support compression.
Note
AMASS assumes a compressed capacity of 2:1 ratio, but some newer drives may have a compressed capacity of 3:1. Consequently, the capacity displayed by the vollist command after a volformat will currently show a 2:1 native GB capacity.
Command Reference |