Managing the AMASS File System

Output Examples

Following are examples of output generated by the idle eject option.

Eject Value for A Drive

In the following example, we set the tape drive to eject idle volumes after 480 seconds:

#drivestat -e 480 1

Setting Idle Eject value for drive 1, juke 1, from 0 to 480 seconds. OK [y/n]? y

Drive 1, in juke 1, will eject idle volumes after 480 seconds.

Eject Value for All Drives

In the following example, we set the drive to zero timeout; the idle eject feature will be disabled for all drives.

Note

This example assumes the global IDLETIME parameter has been set to zero also.

#drivestat -e 0 all

Setting Idle Eject value on all drives from 480 to 0 seconds. OK [y/n]? y

Drives will not eject idle volumes (feature disabled).

3-76

Command Reference

6-00028-01 Rev A