Managing the AMASS File System
Load a New Volume
Step 1. Log in as either amass or root.
Step 2. To make the initial entry in the File System Database and receive from AMASS a unique volume number, use the volnew command.
Step 3. To load volume number 33 in a library, enter the command as shown in the following example. AMASS prints instructions for putting the volume into the library. This instruction line is specific to the library being used.
#su root
#volinlet 33
Place volume into inlet with side A up.
Step 4. After placing the volume in the mailbox, AMASS asks for confirmation of the process.
#volinlet 33
Place volume into inlet with side A up.
Ready? (y/n) y
Inlet operation completed.
If you are using the Standalone Operator Interface, AMASS prompts you to put the volume in the mailbox.
Command Reference |