Managing the AMASS File System
Replace a Full Backup Volume
AMASS issues a warning message when the Backup Volume is almost full.
If you receive a “95% full” message before a backup starts, initialize a new Backup Volume and perform a full backup as described in the following table.
However, if you receive a “95% full” message while a backup is in progress, the backup procedure may fail in which case you must rerun the procedure with a new Backup Volume.
Note
For detailed information on the commands used in these steps, see the "Command Reference" chapter.
Step | Command | Description |
|
|
|
1 | Log in as amass or root. |
|
|
| |
2 | After you have unloaded a full Backup Volume by entering | |
| the following command, store the backup volume in a safe | |
| place. |
|
|
|
|
The volume number of a Backup
Volume must be number 1.
#voloutlet 1
Step | Command | Description |
|
|
|
3To continue, see “Prepare Media to be the Backup Volume” on Page
Operational Tasks |