Managing the AMASS File System

Step 3. Run the volcomp command on specified volume number (2) as shown in the following example:

#volcomp 2

The few files on volume number 2 are moved to another volume in the same volume group.

While the original volume is being volcomped, AMASS marks the volume, shown in the Flag column, with a “C” for volcomp and sets it Read-Only “R”; this can be viewed in the output generated by the vollist command. At the end of the process, the original volume status, shown in the Flag column, is “I” for Inactive.

Additional Information

For more information on recovering dead space, see “Recycle a

Volume” on page 2-21.

6-00028-01 Rev A

Command Reference

3-137