ADTRAN IPR-S1000 manual DNS 1 DNS 2, Example Bridging traffic Bridge only Analyse & bridge

Configuring the IPR-S1000

DNS 1: 000.000.000.000

DNS 2: 000.000.000.000

4)With the «+» or «-»key, fill in one or two fields (IP address type field).

5)Confirm the values by pressing the «down» arrow.

135. Bridging

A bridge is a product that connects a local area network (LAN) to another local area network that uses the same protocol.

This screen allows you to select a bridging mode (affects both Unicast and Multicast).

1)In the «1. Set config» menu, select «13. IP».

2)Enter that menu by pressing the «right» arrow.

3)Select «135. Bridging», and enter that menu by pressing the «right» arrow.

Example:

Bridging traffic:

Bridge only

Analyse & bridge

4)With the «+» or «-»key, select a mode.

5)Confirm the selection by pressing the «down» arrow.

136. ICMP redirect

Internet Control Message Protocol.

This screen allows you to enable or disable the ICMP redirect functionality.

1)In the «1. Set config» menu, select «13. IP».

2)Enter that menu by pressing the «right» arrow.

3)Select «136. ICMP redirect», and enter that menu by pressing the «right» arrow.

Example:

ICMP redirect:

Yes

No

4) With the «+» or «-»key, select «Yes» or «No».

22