ADTRAN IPR-S1000 manual High Band Low band Universal LNB, Example Frequency 12.3790000GHz

Configuring the IPR-S1000

3)Select «111. LNB», and enter that menu by pressing the «right» arrow.

Example:

LNB:

High Band

Low band

Universal LNB

C-Band 3.7>4.2

C-Band 3.625>4.2

C-Band 3.4>4.2

L-Band 0.95>2.15

4)With the «+» or «-»key, select a band.

5)Confirm the selection by pressing the «down» arrow.

112. Frequency

This screen allows you to enter the DVB carrier frequency.

1)In the «1. Set config» menu, select «11. DVB».

2)Enter that menu by pressing the «right» arrow.

3)With the «down» arrow select «112. Frequency», and enter that menu by pressing the «right» arrow.

Example:

Frequency:

12.3790000GHz

4)Enter a value using the same method that you used to set the IP address.

Note: The frequency must be bounded by LNB limits, otherwise the value will be rejected.

5) Confirm the value by pressing the «down» arrow.

113. Bauds

This screen allows you to modify the baud rate (in thousands of symbols per second). It is a floating point number bounded by 1000 to 45000 Kbauds values.

13