Configuring the IPR-S1000

numeric: Allows to display IP addresses.

timeout: Lifetime of the request.

verbose: Allows to display all received ICMP packets.

ppp(Point to point protocol) Acts on PPP process.

close: Allows to force, on request, the closing of the session.

isstarted: Allows to know if PPP service is launched. It launches out automatically when a road borrows the PPP interface.

isup: Allows to know if PPP session is active. If active, allows to know negotiated IP addresses.

pptp (point to point tuneling protocol)

Pptp module - VPN over PPTP.

close: Allows to force, on request, the closing of the session.

isstarted: Allows to know if PPTP service is launched. It launches out automatically when a road borrows the PPTP interface.

isup: Allows to know if PPTP session is active. If active, allows to know negotiated IP addresses.

quit

Allows to exit the shell.

rename + former_name new_name

Allows to rename a profile.

rm + name of the profile Allows to remove a profile.

save

Allows to save the current profile.

set

Sets an attribute value.

spectrum Spectrum analyser.

syslog

Displays system messages. To stop the flow, press CTRL C. system

System action.

autoupdate: Allows to install or delete a new firmware received by the satellite link.

date: Displays the current time and date.

kernelclean: Allows to delete the previous firmware.

80

Page 85
Image 85
ADTRAN IPR-S1000 manual Ppp Point to point protocol Acts on PPP process, Pptp point to point tuneling protocol, Quit, Set