ADTRAN IPR-S1000 manual III The Telnet interface, Shell

Configuring the IPR-S1000

III The Telnet interface.

This chapter describes how to use the Telnet interface to manage the IPR-S1000. The Telnet interface is designed for individuals who have precise and specific needs.

The IPR-S1000 can also be remotely managed with a TCP connection on port 1234.

As an example, you can use the Telnet program to test the protocol.

1. Shell

Starting a Telnet session with the IPR-S1000 will display the following lines:

DotBSD (IPr.IPricot.com) (ttyp0)

login:

Two user’s names may be recognized: Read and Write.

The read ($) login allows configuration access in a «read only» mode. In this mode, data cannot be modified unless the authentication level is changed later on.

The write (#) login allows a complete configuration access and complex task management, such as firmware updating.

Once the connection is authenticated, the following command line will be displayed:

Lock >

Note: Lock or unlock is displayed as soon as the session is open.

The command line uses all editing options:

75