Configuring the IPR-S1000
nat.autoiface_active
Activation of interface change mechanism for incoming IP packages. It is strongly recommended to leave the parameter at AUTO.
nat.autoiface_iface
The interface of entering IP packets.
nat.dyn_active
Allows the automatic choice of the NAT process address to be activated or not.
nat.dyn_iface
Specifies which interface is used for the automatic choice of the address.
nat.msq_in_alias
Specifies the IP address of the outside network that intervenes in NAT mechanism.
nat.msq_in_net
Specifies the inside network that must be changed.
nat.msq_out_iface
The interface which is in the "outside network".
ppp.authname
The login used in the SEND authname script command.
ppp.chat
The script used for the connection only.
ppp.debug
Allows you to have debugging information.
ppp.disconnect
The script used for the disconnection only.
ppp.modem_init
The initialization string used in the SEND init string script command.
ppp.options
The list of the options of PPP connection.
ppp.password
The password used in the SEND password script command. ppp.phone
The phone number used in the SEND phone script command.
pptp.active
Allows to activate the VPN process. This means that the VPN interface
91
