Configuring the IPR-S1000

display_which_bytes: The number of displayed octets for each packet.

display_which_pkts: The interveal of packages between two postings.

ftp_addr: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_login: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_passwd: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_path: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_port: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

mode_ftp: Selects the FTP mode of analysis.

mode_hexa: Screen select mode (hexadecimal format).

mode_hexaline: Screen select mode (hexaline format).

mode_hexdump: Screen select mode (hexdump format).

mode_stat: Displays statistics only, not packets.

pid_list: This mandatory field must be filled in by a list of Program stream IDentifier (PID). The PID minimum value is 0 and its maximum value is 8191.

pkt_count: The program will stop after receiving this number of TS packets.

timeout: The program will stop after this number of seconds.

Note: With the Shell interface it is possible not to set a timeout nor a packet count limit. The user can then stop the program at any time using CTRL C.

With the read login:

auth (Authentication)

Allows to change the authentication level, i.e to switch to the public, read or write level. A password is needed only when switching to a more restricted level.

read: Allows to read the whole IPR-S1000 set up. The user cannot configure the IPR-S1000.

write: Allows a complete configuration access, and allows to change the set up parameters.

bye

Allows to exit the shell.

dvb (Digital Video Broadcasting)

Real-time access to the DVB interface.

dlevel: Digital level in percent.

82

Page 87
Image 87
ADTRAN IPR-S1000 manual Auth Authentication, Dvb Digital Video Broadcasting