Pptp.authname, Pptp.connecttimer, Pptp.debug | ADTRAN IPR-S1000

Configuring the IPR-S1000

becomes available. This does not mean that the PPTP connection is established: the PPTP session remains down as long as no packets are transmitted by this interface.

pptp.authname

Contains the authentification login.

pptp.connect_timer

It is the timeout of the first connection. It is recommended to set a value just greater than the time to set up the PPP link.

pptp.debug

Allows to have debugging information in the IPR-S1000 logging system (see Syslog).

pptp.keep_alive_timer

Allows to configure the time between the keep-alive frames.

pptp.options

The list of the options of PPTP connection.

pptp.password Contains the password.

pptp.pns

Contains the IP address or the FQDN of the PNS, i.e. the PPTP server.

pptp.retry

It is the number of time the connection to the PNS is made. There after, the connection fails, and the PPTP process is reinitialized.

pptp.retry_timer

Timeout of the connections after the first one, which is configured by «connect timer».

snmp.active

Activation of SNMP service.

snmp.community

Community for the access in reading mode only.

snmp.wcommunity

Community for the access in reading and writing mode.

snmp.syscontact Syscontact key of MIB II. snmp.syslocation Syslocation key of MIB II.

snmp.traps

Allows to configure the IP address of the manager and the community

92

Image 97

ADTRAN IPR-S1000 Pptp.authname, Pptp.connecttimer, Pptp.debug, Pptp.keepalivetimer, Pptp.options, Pptp.retry, Snmp.active

Contents

USER’S Guide Acknowledgements Page Installing the IPR-S1000 Telnet interface Audience Document objectivesDocument organization Document conventions Terms and abbreviations Safety recommendationsObtaining technical assistance Material verification Ensure your safety Site requirements Installation checklistProtect the equipment Connecting to the Ethernet network Connecting the cablesConnecting to the satellite antenna Connecting the power cord Starting up the IPR-S1000 Making an initial configuration of the IPR-S1000Making the connection IP address FEC LNB Power Basic screens OverviewExample 12.379 27500K + Auto 11.0dB Main menu Menu Set configExample Ethernet 192.168.43.48/24 Example 1002 0x3ea 11KP10MB 11D MAC filtering 11CDVB High Band Low band Universal LNB ExampleExample Frequency 12.3790000GHz Example FEC Auto 1/2 2/3 3/4 4/5 5/6 6/7 7/8 8/9 Example Bauds Kbauds Example Modulation Example Polarization Vert./RHCP/14v Horiz./LHCP/18vPSK 16 QAM Example DVB IP address 172.022.000.051/24 Example LNB Power OffExample Start MPE PID 1002 0x3ea Example Processing CRC MPE Yes Example Stop MPE PID 1002 0x3ea 3032 0xbd8 Ethernet IP address Media type Example MAC address filtering on 6 bytesEthernet 13. IP Example IP address 192.168.043.048/24 Example Broadcast bridging Yes Example Unicast forwarding Routing Bridging Mcast forwarding Yes routing Yes bridging Example Mcast forwarding Accept src addrNew network address 000.000.000.000/00 Multicast On/Off Example Bridging traffic Bridge only Analyse & bridge DNS 1 DNS 2Example Icmp redirect Yes Example Def. none Edit Delete Example Delete all routes? CancelOk Example Profile name Profiles Save Fact. profile Tftp load Tftp saveProfiles Example Tftp Server addr Factory profile Startup Load New read password New write passwordReceipt code 12.379 27500K + Auto 5.6dB Menu View ConfigActive MPE PID 1002 0x3 ea DVB MAC address 00D0B5XXXXXX Monitoring Temperature 35.3 C Uncor. packets Reset ?Example Really reboot? ? Cancel Unlock Vber 1.3 E Version FirmwareQPSK S1000-3.01.41a Main Configuring the IPR-S1000 Configuring the IPR-S1000 Profiles and passwords Load Management System Reboot DVB Field, enter the low band local oscillator Interface Tuner Ethernet Definition This module allows you to manage IP parameters Forwarding User Interface Fixed Key Conditionnal Access Snmp Snmp traps Syslog Bandwidth IP Crypt Firewall Mac addresses NAT Drop-down menu, select active to start NAT PPP Configuring the IPR-S1000 Configuring the IPR-S1000 Pptp Configuring the IPR-S1000 Udlr Drop-down menu, select active to start Udlr Spectrum Tools TS Dump Configuring the IPR-S1000 DVB Dump IP Dump Configuring the IPR-S1000 Ethernet Ping Traceroute You are trying to reach is actually operating Blank field, enter the hostname or IP address Network statistics Shell III The Telnet interface Example + name of the profile Commands Abort Auth AuthenticationBye Delete + name of the profile to be removed Exit GetdefaultGet section.attribut Help List LastprofileLoad + name of the profile Loadfactory Pptp point to point tuneling protocol Ppp Point to point protocol Acts on PPP processQuit Rename + formername newname Tftpsave TftploadTraceroute + IP address or «Host» name Tsdump Dvb Digital Video Broadcasting Get Displays NAT information System System action Traceroute + IP address or «host» name Bandwidth.size Sections and attributesDvb.bauds Dvb.dvbipaddr Dvb.crcmpeDvb.fec Dvb.freq Dvb.polar Dvb.mpepids List of MPE PIDs Dvb.mtuDvb.relaxbauds Dvb.scanfreq Ip.macaddr Ip.keepforusIp.mcastaddr Ip.multicast Nat.autoifaceactive Ppp.passwordNat.autoifaceiface Nat.dynactive Pptp.keepalivetimer Pptp.connecttimerPptp.password Contains the password Pptp.pns Pptp.retrytimer IV. The Snmp interface Glossary CRC DRO Iana ISO MPE Pstn RIP Vsat IPricotSA