ADTRAN IPR-S1000 manual Factory profile Startup Load, Example Tftp Server addr

Configuring the IPR-S1000

Factory profile:

Startup

Load

4)With the «+» or «-»key, select startup or load.

5)Confirm the selection by pressing the «down» arrow.

143. TFTP load

This screen allows you to load a profile stored on a TFTP server.

1)In the «1. Set config» menu, select «14. Profiles».

2)Enter that menu by pressing the «right» arrow.

3)Select «143. TFTP load», and enter that menu by pressing the «right» arrow.

Example:

TFTP Server addr.: 192.168.001.004

4)With the «+» or «-»key, enter the TFTP server address.

5)Confirm the selection by pressing the «down» arrow.

144. TFTP save

This screen allows you to save the current configuration to a TFTP server.

1)In the «1. Set config» menu, select «14. Profiles».

2)Enter that menu by pressing the «right» arrow.

3)Select «144. TFTP save», and enter that menu by pressing the «right» arrow.

Example:

TFTP Server addr.: 192.168.001.004

Note: The current configuration will be saved on the TFTP server under the name dotlink.cnf

4)With the «+» or «-»key, enter the TFTP server address.

5)Confirm the selection by pressing the «down» arrow.

15. Chg. write pwd

This screen allows you to enter a new password for the write level.

25