ADTRAN IPR-S1000 manual Example Stop MPE PID 1002 0x3ea 3032 0xbd8, Example Processing CRC MPE Yes

Configuring the IPR-S1000

1)In the «1. Set config» menu, select «11. DVB».

2)Enter that menu by pressing the «right» arrow.

3)With the «down» arrow, select «11A. Stop MPE», and enter that menu by pressing the «right» arrow.

Example:

Stop MPE PID: 1002 (0x3ea) 3032 (0xbd8)

32(0x20)

4)With the «+» or «-»key, select a PID.

5)Confirm the selection by pressing the «down» arrow.

11B. MPE CRC

Multi Protocol Encapsulation - Cyclic Redundancy Check.

This screen allows you to turn on or off CRC checking at the MPE level.

1)In the «1. Set config» menu, select «11. DVB».

2)Enter that menu by pressing the «right» arrow.

3)With the «down» arrow, select «11B. MPE CRC», and enter that menu by pressing the «right» arrow.

Example:

Processing CRC MPE:

Yes

No

4)With the «+» or «-»key, select «Yes» or «No».

5)Confirm the selection by pressing the «down» arrow.

11C. LLC-SNAP

Logical Link Control-Subnetwork Access Protocol. An Internet protocol that operates between a network entity in the subnetwork and a network entity in the end system. The SNAP entity in the end system makes use of the services of the subnetwork and performs three key functions: data transfer, connection management, and QoS selection.

This screen allows you to accept or reject MPE sections that are known to carry LLC-SNAP packets.

1)In the «1. Set config» menu, select «11. DVB».

2)Enter that menu by pressing the «right» arrow.

17