Manuals / Brands / Computer Equipment / Server / ADTRAN / Computer Equipment / Server

ADTRAN MP-114, MP-118 3.3.1.3 Modifying Parameters Specific to Site Deployment

1 44

Download 44 pages, 1.83 Mb

Quick Installation Guide 3. Configuring the MediaPack

Version 5.0 19 September 2007

Figure 3-8: Configuration File Screen

4. Click the Browse button, and then navigate to the folder that contains the ini file you want to

upload.

5. Select the file, and then click the Open button; the name and path of the file appear in the

field beside the Browse button.

6. Click the Send ini File button, and then at the prompt, click OK; the gateway automatically

resets (from the version stored on the flash memory).

3.3.1.3 Modifying Parameters Specific to Site Deployment

Typically, for interoperability with the deployed PBX / PSTN interface and Office Communications

Server 2007, it's sufficient that you use the ini file obtained from AudioCodes' Web page. This file

contains all the required parameter settings for the gateway to seamlessly operate in this

application setup. However, due to specificity of site deployment, the following configurations may

need to be configured or modified:

 IP address of Mediation Server (refer to Section 3.3.2.1 on page 20)

 Number of FXO ports connected to the PBX (refer to Section 3.3.2.2 on page 22)

 Voice coders (refer to Section 3.3.2.3 on page 23)

 Numbers translation (normalization) from/to E.164 format using Manipulation tables for PBX /

PSTN connectivity - depends on deployment dial plan (refer to Section 3.3.2.4 on page 23)

 Answer Supervision (refer to Section 3.3.2.5 on page 28)

 Automatic Dialing (refer to Section 3.3.2.6 on page 29)

 Caller ID (refer to Section 3.3.2.7 on page 30)

4

6

Contents

Main Page Table of Contents Page Notices Notice Trademarks WEEE EU Directive Customer Support Abbreviations and Terminology Related Documentation 1 Introduction Page 2 Quick Start 3 Configuring the MediaPack 3.1 Embedded Web Server Management Tool 3.1.1 Accessing the Embedded Web Server To access the Embedded Web Server, take these 4 steps: Page 3.1.3 Changing Login Username and Password To change the user name and password, take these 3 steps: 3.1.4 Searching for ini file Parameters To search for an ini file parameter configurable by the Embedded Web Server, take these 3 steps: 3.2 Assigning an IP Address to the MediaPack 3.2.1 Assigning an IP Address using BootP To assign an IP address using BootP, take these 3 steps: 3.2.2 Assigning an IP Address Using CLI via RS-232 To assign an IP address using CLI via RS-232, take these 5 steps: 3.2.3 Assigning an IP Address using HTTP To assign an IP address to the gateway using HTTP, take these 5 steps: 3.3 Advanced Configuration 3.3.1 Using the ini File 3.3.1.1 Obtaining the ini File from the Web To download the ini file to your PC, take these 4 steps: 3.3.1.2 Uploading the ini File to the Gateway To upload the ini file to the gateway, take these 6 steps: 3.3.1.3 Modifying Parameters Specific to Site Deployment 3.3.2 Using the Embedded Web Server 3.3.2.1 Defining Mediation Server's IP Address To define Mediation Server's IP address, take these 4 steps: 3.3.2.2 Defining Number of FXO Ports Connected to PBX To enable the gateway's FXO ports, take these 4 steps: 3.3.2.3 Defining Voice Coders To define the coder, take these 3 steps: 3.3.2.4 Translating Numbers From / To E.164 Using Manipulation Tables for PBX/PSTN Connectivity To configure the Number Manipulation tables, take these 4 steps: 3.3.2.4.1 Dialing Plan Notation 3.3.2.4.2 Number Normalization Examples Page 3.3.2.5 Defining Answer Supervision To define the Answer Supervision, take these 3 steps: Page 3.3.2.7 Enabling Caller ID To enable Caller ID, take these 3 steps: Page 3.3.2.9 Defining Disconnect on Broken Connection To define Disconnect on Broken Connection, take these 3 steps: 3.3.2.10 Defining DTMF Payload Type To define the DTMF payload type, take these 3 steps: 3.3.2.11 Enabling One-Stage Dialing To enable one-stage dialing, take these 3 steps: 3.3.2.12 Defining Channel Select Mode To define the Channel Select mode, take these 3 steps: 3.3.2.13 Disabling RTCP Attribute To disable the RTCP attribute, take these 5 steps: 4 Backing Up Configuration Settings To save the ini file on your PC, take these 6 steps: 5 Monitoring the Gateway 5.1 Front-Panel LEDs 5.2 Monitoring the Channels To monitor the status of the channels, take this step: To monitor the details of a channel, take these 2 steps: 6 Troubleshooting 6.1 General Troubleshooting 6.2 Restoring Parameters to Factory Default Settings To restore factory default settings, take these 3 steps: 6.3 Debugging using a Syslog Server To configure the Syslog parameters, take these 7 steps: MP-11x & Microsoft Office Communications Server 2007 Quick Installation Guide 42 Document #: LTRT-26301 7 Regulatory Information Declaration of Conformity Quick Installation Guide 7. Regulatory Information Safety Industry Canada Notice Network Compatibility Telecommunication Safety SELV: Safety extra low voltage circuit.