ADTRAN T3SU 300 user manual If you want to Press, Status, Statistics, Configuration, Diagnostics

Chapter 2. Installation and Operation

If you want to...	Press...
select an item	the number corresponding to your
	choice, and then press the Enter
	key.
scroll between screens	the up and down arrow keys. Addi-
within the same selection	tional screens are available when
	<up> or <down> is displayed in the
	right-hand side of the menu.
return to the previous	the ESC key.
menu
end the terminal session	Ctl-C.
refresh the display	Ctl-R.

The T3SU 300 MAIN menu consists of the following sections:

Status

This selection provides status information on the Network and DTE ports. See the chapter Status on page 4-1 for more information.

Statistics

This selection provides statistical information for the Network port. See the chapter Statistics on page 5-1 for more information.

Configuration

The CONFIGURATION menu is used to set network, DTE, and system management parameters. See the chapter Configuration on page 3-1 for more detailed information.

Diagnostics

The DIAGNOSTICS menu is used to perform loopback and BERT tests. See the chapter Diagnostics on page 6-1 for more detailed information.

Remote Login

The REMOTE LOGIN selection allows you to configure the remote

T3SU 300. The remote unit’s password is required at login. The

DATALINK option (in the DS3 NETWORK CONFIGURATION menu)

must be enabled in order to perform remote configuration.

2-8 T3SU 300 User Manual 61200217L1-1