Your First Session With The QuadraSynth Plus: Chapter 2

Editing a Mix

In this section, we will assign Programs to and set volume levels for the 16 MIDI channels in a Mix, for playing back tracks from a MIDI sequencer. However, there is much more about a Mix that may be edited. Refer to Chapter 5 for more about Mix editing.

¿Press [MIX] and select a Mix using one of the three methods described above.

¡Press [SELECT].

The top line of the LCD’s function list will read “EDITING: MIX”.

¬Simultaneously press both the FUNCTION [] and [] buttons.

Use the MIDI [] and [] buttons to select a MIDI channel for

editing.

The MIDI monitor and selection strip will indicate the selected MIDI channel with an underline. These buttons “wrap around” (e.g., if you’re on channel 16 and press MIDI [], you’ll select channel 1. If channel 1 is selected and you press MIDI [], you’ll select channel 16).

ƒUse Quad Knob [1] to choose a Bank (User, Preset 1 – 4).

HUse Quad Knob [2] to select a Program for the selected Channel.

J

Don’t use the MIX/PROGRAM SELECT [1]—[0]buttons while in any edit mode. If you do, you will be kicked out of Mix Edit mode and will select another Mix, losing your changes.

Use Quad Knob [4] to enable or disable the Program on the selected Channel.

When enabled, the Channel number will appear in the top left of the display. When disabled, the Channel number will not appear (unless selected for editing using the MIDI [] and [] buttons, in which case it is underlined).

«To set the Program’s level, press the FUNCTION [] button once so that “LEVEL” is underlined in the display. Use Quad Knob [1] to adjust the level.

QuadraSynth Plus Piano Reference Manual

25

Page 24
Image 24
Alesis QuadraSynth Plus manual Editing a Mix, Top line of the LCD’s function list will read Editing MIX