Overview: Chapter 4
To audition Programs before overwriting them with STORE …when editing a Program in Mix Edit Mode:
¿While in Mix Program Edit mode, press [PROGRAM].
This selects Program Play Mode, retaining your edits to the Program in Mix Edit.
¡Press the BANK [♦] button until the word “USER” appears in the top part of the display, just before the Program name. If a RAM card is inserted, use the BANK buttons to select a Card Bank.
¬Use the VALUE [‾] and [¬] buttons to scroll through the Programs until you find one you wish to overwrite with the new edited Program. Take note of the number.
Press [MIX].
This recalls the edit buffer in Mix Mode, which contains your edited Program.
ƒPress [SELECT] twice, until “EDITING: PROGRAM” appears under the MIX number in the display.
HPress [STORE].
The top line of the display will read “STORE PRG UsrXXX?” where XXX is a User Program number from
Use Quad Knob [2] to select the Program number you noted in step 3. If necessary, use Quad Knob [1] to select a Card Bank.
«Press [STORE] again. The Program is now stored.
At this point your edited Program is stored, however the Mix you were auditioning before storing the Program still has the old Program number assigned (if the edited Program was saved to a different Program number location). Therefore, you need to
»Press [MIX], then [SELECT] to access Mix Edit mode.
…Use the MIDI [♦] and [∅] buttons to select the MIDI channel you want, and use the VALUE [‾] and [¬] buttons or Quad Knob [2] to select the Program number. If necessary, use Quad Knob [1] to select the Bank.
QuadraSynth Plus Piano Reference Manual | 56 |
