Editing Mixes: Chapter 5
Program Assign for each MIDI Channel
The first function of Mix Edit is Program Assign.
Program Bank (User, Preset 1–4, Card)
This determines which Bank the selected Program is located in for the selected MIDI channel. There are five Banks available in the QuadraSynth Plus. If you insert a QuadraCard Sound Card, you can have even more Banks.
Program Number (000 to 127)
This determines the Program Number
Enable (On or Off)
This determines whether the Program on the selected channel is enabled or disabled. When disabled, no sound will be generated by the QuadraSynth Plus. The Channel number in the display for a disabled channel will not appear except when selected for editing.
J
Even if a channel is enabled here, it will not play unless the proper settings in the RANGE function (MIDI IN and/or KEYBOARD On/Off and LOW/HIGH) are made.
Level Setting for Each Program
The second function of Mix Edit is Level.
Level (00 to 99)
This sets the overall volume for a sound. Higher numbers give higher levels.
Pan (<3 to 3>, or PG )
This determines the pan position of the selected channel. When set to PG, the panning setting will be that of the Program assigned to the selected channel. However, you can override this setting by selecting a different value, thereby assigning the channel’s panning between the left and right outputs of either the MAIN or AUX outputs (depending on the Output
Output (MAIN, AUX, OFF, or PROG)
This determines the audio output assignment for the selected channel. When set to PROG, the channel will use the Output assignment of the Program. However, you can override this assignment by setting this parameter to something different. Selecting MAIN or AUX will assign the channel to the MAIN or
QuadraSynth Plus Piano Reference Manual | 61 |
