Alesis QuadraSynth Plus manual Configuration #4 2-Sends, with EQ, Pitch 1 Delay 1Reverb Misc

Editing Effects: Chapter 7

Configuration #4: 2-Sends, with EQ

Pitch 1 Delay 1Reverb 1		Misc. 1
Mono chorus	Mono delay	Plate 1	EQ
Stereo chorus	Stereo delay	Plate 2
Mono flange	Ping-Pong delay		Room
Stereo flange	Hall
Pitch detune	Large
Resonator	Gate
	Reverse
Pitch 2 Delay 2Reverb 2
Mono chorus	Mono delay	Balance and level
Stereo chorus	Stereo delay	to Reverb 1
Mono flange	Ping-Pong delay
Stereo flange
Pitch detune
Resonator

In this Configuration, note that Sends 1 and 2 are identical to that of Configuration #1. However, Sends 3 and 4 have been removed. In their place, we have added a shelving EQ module to the main outputs. This means you have bass and treble boost controls for all sounds coming out of the main outputs (not just the sounds routed to the Effects Sends).

J

If you are using Configuration #4, routing any of the Program’s Sounds to Send #s 3 or 4 will have no effect. In other words, it’s as if you routed channels of your mixing console to effects sends that aren't connected to anything.

The MISC function is where you access the EQ parameters used in this configuration. This can be selected in the same manner as any other function using the FUNCTION [♦] and [∅] buttons. The shelving EQ provides bass and treble boost, and affects the entire main output.

QuadraSynth Plus Piano Reference Manual 141