Overview: Chapter 4
Copying Effects Between Programs
Follow the steps below to copy the Effects from one Program to another Program in the User Bank.
¿Press [PROGRAM] to select Program Play Mode.
¡Use the VALUE [¬] and [‾] buttons to select the Program Number that uses the Effects you want to copy. If necessary, use the FUNCTION [♦] and [∅] buttons to select a different Bank.
¬Press [STORE].
Press PAGE [∅] once to advance to Page 2.
The top right section of the display will read “COPY TO SOUND 1”.
ƒTurn Quad Knob [1] clockwise until the display reads “COPY
FROM EFFECT”.
This selects the Effects of the currently selected Program as the source of what is to be copied.
HTurn Quad Knob [2] to select the Program Number in the User Bank you wish to copy the Effects to
Press [STORE] to complete the copy function.
Store an Effect
If you have edited a Program’s Effect and would like to store it without storing the changes you’ve made to the Program’s parameters, you can use the Copy Effect function to store only the Effects edits to the currently selected Program. When you recall this Program, it will have the new Effects settings you saved it with, but will retain its previously stored Program parameter settings.
Store a Mix
¿While in either Mix Play Mode or Mix Edit mode, after making your edits press the [STORE] button.
¡Select the memory Bank and location to which you want to store the Mix using Quad Knob [1] and [2]. respectively.
If no RAM Card is inserted, you will only be able to select the User Bank.
J
Do not use the DIRECT SELECT
¬Press [STORE] again to complete the operation.
J
QuadraSynth Plus Piano Reference Manual | 52 |
