Removing the Memory Module(s) 1 and 2
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Your computer supports up to four memory module connectors. You can access connectors DIMM3 and DIMM4 are located under the base cover. DIMM1 and DIMM2 are located under the keyboard.
Prerequisites
1Remove the base cover. See "Removing the Base Cover" on page 14.
2Remove the battery. See "Removing the Battery" on page 16.
3Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
4Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on page 24.
5Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on page 27.
6Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Memory Module(s) 1 and 2 | 50 |
