| |
Terminal Block Access | To access the power and control terminal blocks, |
| perform the following procedure: |
WARNING
To reduce risk of electric shock, severe injury or death, allow machine power to remain off for three minutes minimum prior to working in and around AC drive. Proceed with caution.
W662
The following information illustrates the terminal block designations for each of the drive models.
1.Remove power from machine at main disconnect. Verify power light is off.
2.Loosen the front cover fastener located at the base of the front cover. Refer to Figure 48.
3.Lift off cover.
NOTE: HIM unit extension unit cable inserts into separate port for 1305 and 1336
TB3 
ES | Stopped+0. | ||
| 00 | Hz | |
C | SEL |
| |
|
|
| |
ES | Stopped+0. | ||
| 00 | Hz | |
C | SEL |
| |
|
|
| |
Front Cover
TB2 TB1
TB3 TB2 TB1
U077ME3B
Figure 48
86 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232120 |