APC VS 50 Parameter Name, Description, SETTINGS Default, Menu Location, settings in BOLD, Page

Figure 6.8-1 Parameter Locations, Descriptions, and Settings

PARAMETER NAME/	DESCRIPTION	SETTINGS (Default
[MENU LOCATION]		settings in BOLD)
Alarms Item 1	Display of up to 16 active alarms (a	No Alarms
{Status Only}	typical alarm screen is shown).	•
[System/Active Alarms]	•	•
•	•	•
•	•	No Alarms
•	Display of up to 16 active alarms (a
Alarms Item 16	typical alarm screen is shown).
[System/Active Alarms]
Battery Current	Battery current measured by the system	Status Only
{Status Only}	controller at the battery current shunt.
[System/DC Parameters]
Battery Discharge Alarm	Defines the output relay that is energized	Ignore, Minor, Major
[Batteries/Parameters]	if the battery discharge current exceeds	Output Relay 1-6
	the programmed battery discharge
	threshold.
Battery Discharge Threshold	An alarm is generated if the battery	0 A – 20A, 5 A
[Batteries/Parameters]	discharge current exceeds this value.
Battery Float Voltage	One of three parameters that control the	-56.5 – -47.0, -54.00 V
[Batteries/Parameters]	dc output voltage. Set the Float Voltage
	at 25°C battery temperature per the
	battery manufacturers recommendations.
Battery High Temperature	Defines the output relay that is energized	Ignore, Minor, Major
Alarm	if the battery temperature exceeds the	Output Relay 1-6
[Batteries/Parameters]	Battery High Temperature threshold.
Battery High Temperature	Battery Temperature is temperature	-100 °C – 200 °C, 40.0 °C
Threshold	measured at the battery probe. An alarm
[Batteries/Parameters]	is generated if the battery temperature
	exceeds this value.
Battery High Voltage Alarm	Defines the output relay that is energized	Ignore, Minor, Major
[Batteries/Parameters]	if the dc output voltage rises above the	Output Relay 1-6
	battery high voltage threshold.
Battery High Voltage Threshold	An alarm will be reported if temperature	-40.00 V – -60.00 V, -
[Batteries/Parameters]	is lower than the temperature entered.	58.00 V
	An alarm is generated if the dc output
	voltage rises above this value.
Battery Low Temperature	Defines the output relay that is energized	Ignore, Minor, Major
Alarm	if the Battery Temperature drops below	Output Relay 1-6
[Batteries/Parameters]	the battery Low Temperature threshold.
Battery Low Temperature	Battery Temperature is temperature	-100 °C – 200 °C, -20.0
Threshold	measured at the battery probe. An alarm	°C
[Batteries/Parameters]	is generated if the battery temperature
	drops below this value.
Battery Low Voltage Alarm	Defines the output relay that is energized	Ignore, Minor, Major
[Batteries/Parameters]	if the dc output voltage drops below the	Output Relay 1-6
	battery low voltage threshold.
Battery Low Voltage Threshold	An alarm is generated if the dc output	-40.00 V – -60.00 V,
[Batteries/Parameters]	voltage drops below this value.	-44.00 V

Magnum VS –48 Vdc User’s Manual Page 38