Apollo user manual SIS-7018 AC97 Audio, SIS-900 10/100M Ethernet, Apollo 120/150 123

User Manual version 2007

SIS 630 ONCHIP PCI DEVICE

uSIS-7018 AC97 AUDIO

Select Enabled to support AC97 Audio.

The choice: Enabled or Disabled.

uSIS-900 10/100M ETHERNET

This item provides a total communication solution including 10/100Mb Fast Ethernet for Office requirement and 1Mb HomePNA for Home Networking.

The choice: Enabled or Disabled.

uONBOARD FDC CONTROLLER

Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install and-in FDC or the system has no floppy drive, select Disabled in this field.

The choice: Enabled or Disabled.

uONBOARD SERIAL PORT 1/PORT 2/PORT 3/PORT 4

Select an address and corresponding interrupt for the first and second serial ports.

The choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ10, 2E8/IRQ11, Disabled or Auto.

uUART MODE SELECT

This item allows you to select UART mode.

The choice: Enabled or Disabled.

uUR2 DUPLEX MODE

This item allows you to select the IR half/full duplex funcion. The choice: Half or Full.

uONBOARD PARALLEL PORT

This item allows you to determine access onboard parallel port controller with which I/O address.

The choice: 3BC/IRQ7, 378/IRQ7, 278/IRQ5, Disabled.

APOLLO 120/150 III 7-123