Apollo 150, 120 user manual External FDD Connection

User Manual version 2207

5.9.2.External FDD Connection

1.Use the provided 15-34 pin FDD cable (see below figure) to connect to the system's 15-pin FDD D-sub connector located at the rear side of the cover.

FDD cable

2.Connect the other end (34 pin) of the FDD cable to a standard 3.5” FDD. Match pin 1 of the FDD and pin 1 of the cable.

3.To drive the floppy disk drive, it will need 5V power. Connect the provided FDD power cable to the floppy disk drive to the +5V/12V DC-out connector to obtain 5V power for the device.

5-68 APOLLO 120/150 III