User Manual version 2007
C: Wake-On-LAN
The Wake-On-LAN is a remote management tool with the advantage to reduce system management workload. It provides the capability to remotely power on the client computers supporting Wake-On-LAN by simply sending a “wake up packet”. After powering up the client systems, the user is able to monitor the remote systems’ status and to upload or download files to or from the clients. With this feature, MIS persons can flexibly perform client maintenance during off-hours; the Total Cost of Ownership (TCO) will be thus lowered.
To use Wake On LAN function, the client system must have a network card with chipset that supports the Wake-On-LAN and an ATX power supply meeting 2.01 with at least 720mA standby current is also required to support the Ethernet card for this function. The APOLLO is a panel PC system with these two features. To use the APOLLO Wake-On-LAN function, please refer to the following;
1.Download the “Wake up packet”,
PCnet Family Software Magic Packet Utility. This utility is downloadable from AMD website at
http://www.amd.com/us-en/Networking/ProductInformatio n/0,,50_2330,00.html
Or refer to the Magic Packet ™ Technology at AMD website for how to write your own wake-up program.
http://www.amd.com/us-en/Networking/TechnicalResource s/0,,50_2334_2481,00.html
2.BIOS Setting
Enter the \POWER MANAGEMENT SETUP\PM WAKE UP EVENTS to enable the MACPME POWER UP CONTROL
