User Manual version 2207
When Recalibration is Necessary
Once calibrated, the touchscreen will be ready to run automatically each time the system is restarted. Recalibration should only be necessary after moving or resizing the video image, or after changing either the touchscreen, controller, or monitor.
Type "DEMOCAL" or click on “Calibrate” in the Windows Touchscreen Control Panel to
UNINSTALLING THE SOFTWARE Demonstration Program
You may wish to delete the demonstration program from your hard disk after you have run it. This will free approximately
1.7Mbytes of disk space. Delete EloDEMO.EXE, *PIC,*.IMG, and *.BGI, typically found in the \TOUCH directory.
MonitorMouse for Windows
Delete CURSOFF.EXE and Elo.BMP from the \WINDOWS directory. Delete MONMOUSE.DRV, VMMD.386, EloCALW.*, and OEMElo.INF from \WINDOWS\SYSTEM. Delete the lines indicated by comments as added by Elo from your SYSTEM.INI file. Delete the [EloCalW] section from WIN.INI. Run Winodws Setup and
All Elo Software
Delete the Elo directory (typically \TOUCH) and then follow the above instructions to delete MonitorMouse for Windows if necessary. Remove any lines for EloDEV, MONMOUSE, NOMOUSE, and TCHBACK from AUTOEXEC.BAT as necessary.
APOLLO 120/150 III |
