3.5.2 M-100B™ Computer Programming Mode
How to Enter the Program Mode
1.Press the ON/OFF 
switches until both displays of cooking computer indicate OFF. Press the left product selection switch 
and the left 1 and 2 cook switches simultaneously. Release all three switches at the same time.
2.When the program mode has been entered, the display will flash
How to Reset the Computer to the Factory Defaults
While in the program mode, press all 4 cook switches (left and right 1 and 2 ) simultaneously to reset the computer to the factory defaults. See How to Enter the Program Mode above. Updating menu will flash in the display, followed by epra cleared and cooks cleared. After a few seconds, Fr fries yes will be displayed, indicating that the computer has been reset to the factory defaults.
How to Change the Shake, Pull, Or Quality Times for Menu Items
1.Enter the program mode. (See How to Enter the Program Mode above.)
2.Press and release the 
switch until the product to be changed appears in the left display.
3.Press and release the 
switch until the function to be changed (SHAKE, PULL, or QA) appears in the left display. The current time setting and automatic (AUTO) or manual (MAN) alarm cancel mode options appear in the right display.
NOTE: Shake Time refers to the programmed time at which the operator will be prompted by an audible alarm to shake the basket, but not stop the cooking process. Pull Time refers to the programmed time at which the product is fully cooked and at which the operator will be prompted by an audible alarm to remove the basket from the cooking oil. QA Time refers to the maximum time that a product may be held after the cooking cycle has completed.
NOTE: When the programmed time has elapsed, the automatic
4.Press the right 2 switch to toggle between automatic alarm cancel mode (AUTO) and manual alarm cancel mode (MAN).
