Frymaster H14 Series service manual Left element- 9-pin Right element- 6-pin Connector

7-5: REPLACE HEATING ELEMENT (cont.)

10.When replacing the left element (as viewed from the rear of the fryer), use the 9-pin connector, inserting the leads from the replacement element and closing the connector, see previous step.

11.Insert the connector(s) into the receptacle(s) on the rear of the contactor box, ensuring that the latches lock the connectors in place (see Step 9).

12.Install the temperature probe wires (marked for re-assembly) in the corresponding pin locations.

13.Reconnect the element spring.

14.Place the tilt housing cover over the tilt housing assembly and secure with screws.

15.Install covers and secure with screws.

16.Position fryer under exhaust hood.

Left element— 9-pin	Right element— 6-pin
connector	connector

7-8