User Manual version 2007
4.3. 100/10 Base-T Ethernet (RJ-45)
The APOLLO 120/150 provides a 100/10 Base-T NE2000 compatible Ethernet (RJ-45) interface. For network connection, follow the instructions below.
1. Turn of the APOLLO system and the Ethernet hubs.
2. Plug in one end of cable of a 100/10 Base-T hub to the system’s RJ-45 phone jack. The pin assignment of the RJ-45 is listed as follow;
1 2 3 4 5 6 7 8
| RJ-45 |
RJ-45 Connector Pin Assignment |
Pin | Description |
1 | Tx+ (data transmission positive) |
2 | Tx- (data transmission negative) |
3 | Rx+ (data reception positive) |
6 | Rx- (data reception negative) |
others | No use |
4.4. VGA Interface
The APOLLO 120/150 has a 15-pin analog RGB connector located at the rear side of the chassis. It can support its own LCD display and an expansion CRT or analog monitor at the same time. The connection to an analog monitor is an easy plug-in of the VGA D-SUB 15-pin connector to the RGB interface.
