Replacing the AC Line Filter
1.Install the AC power inlet on the rear housing screw mounts with three self tapping screws.
2.Install the power inlet ground cable to the chassis with a machine screw.
3.Route the power inlet cable beneath the chassis as shown in the photo above, and connect it to the power supply.
4.Using EMI tape, securely tape the top and bottom edges of the AC power inlet to the rear housing.
5.Replace the hard drive fan.
6.Replace the logic board.
7.Replace the optical board
8.Replace the hard drive.
9.Replace the speakers.
10.Replace the display panel.
11.Replace the lower EMI shield.
12.Replace the front bezel.
13.Replace the memory.
14.Replace the memory access door.
iMac